Analytes Certified for in 2020 |
|
|---|---|
| Certifications Menu | |
Exchangeable Bases - Ammonium Acetate (15D3)
Exchangeable bases - 1M ammonium acetate at pH 7.0.
This rapid method for exchangeable cations in non-saline acidic through to slightly alkaline soils has no pre-treatment for soluble salts. It should yield similar data to those of method 15A1, except it can overestimate exchangeable Ca in soils containing calcium carbonate.
DTPA Trace Elements (12A1)
Soils are extracted with 0.005M DTPA, at a 1:2 soil:solution ratio, and shaken for 2 hr at 25oC. Analytical finish is either ICP-AES or Flame AAS.
Organic carbon - W & B (6A1)
This measure of soil organic carbon (OCW&B; expressed as %C) usually yields a lower figure than the true total organic carbon value. The method uses finely-milled air-dry sample. It involves wet oxidation by a dichromate-sulphuric acid mixture and relies only on heat of reaction. Soil weight should take account of the expected concentration of OC, and it is expected that allowance will be made for positive soluble Cl‑ interference in soils containing >0.5% Cl. The method specifies reporting on an oven-dry (105oC) basis. Nowadays this method is less preferred than 6B methods.
Total soil nitrogen semi micro Kjeldahl, steam distillation. (7A1)
Method 7A1 provides a good estimate of total soil N in soils with little NO3: otherwise slightly lower apparent total soil N concentrations are likely. The method initially involves semi-micro Kjeldahl digestion. Subsequently, NaOH solution is added to release NH3 by steam distillation. The NH3 released is quantitatively absorbed in dilute boric acid, with total soil N determined by titration with standard acid. The method uses finely-milled air-dry sample and specifies reporting results as %N on an oven-dry (105oC) basis.